Home

Trick Out Your Nexus 7's Lock Screen with a Custom Lockring Icon

Apr 18, 2014 05:07 PM

If you're as bad at locking your Nexus up as I am, you have the "slide" option set for your screen lock. It may not be the most secure option, but it's definitely the easiest way to unlock your device while being able to utilize lock screen widgets.

Now look at your lock screen. See that bubble with the padlock in it? That's your lockring, and I bet you never really paid attention to it before. That's because you've swiped it so many times you forgot it was even a thing.

Well, in today's softModder guide, I'm going to show you how to never forget that lockring again by customizing it with something more unique and individualized.

While the process may involve a few more steps than installing an Xposed mod, it's still relatively simple. Just make sure that your Nexus 7 is rooted and has a custom recovery installed before going any further.

Step 1: Install ZipThemer

In order to customize the lockring on the Nexus 7, you'll first need to download and install ZipThemer (free on Google Play), which enables you to build your flashable .zips. More on flashable .zips later.

Step 2: Download Edify (For Stock ROMs Only)

You will also need the KitKat Stock Edify .zip file, but only if you are running the stock OS. If you're on a custom ROM, you can skip the Edify file (but you'll still need ZipThemer above).

Step 3: Select Your Custom Lockring

Next, you'll need your custom lockring. Since making your own is relatively hard, I suggest using one of the pre-made ones already available.

Check out the this thread by XDA member mathewo776 to see all of the available options. Or, you can simply select from a few of my favorite lockring designs below.

Download the .zip file for the lockring of your choice, then move on to the next step. Remember the name of your theme, as it will make it easier to locate it later in the process.

Step 4: Set Up ZipThemer

Open the ZipThemer app you installed in Step 1 and tap the three-dot menu option up top, then select Update Edify.

Tap Browse and locate the KitKat Stock Edify .zip file you downloaded in Step 2, which should be under your Downloads folder, unless you moved it.

If you're running a custom ROM, select the .zip file for the ROM itself.

Once selected, go back and hit Configure and you should get a toast notification saying Success!.

Step 5: Build Your Flashable Zip (& Backup)

Now that you're configured, go back a screen and select the Output File.

Tap +Theme and browse for the custom lockring .zip that you downloaded in Step 3. Again, unless you moved it, it should be in your Download folder.

After selecting the .zip file, go back and tap Build It!. The application will ask if you want to create an Undo file as well—select Always. This will insure that you have a backup of your original lockring which can also be flashed in recovery if you want to revert back.

Step 6: Enter into Bootloader Mode

Now that your .zip is ready and flashable, enter into recovery, either manually or using an app like Reboot Menu Widget or Quick Boot. You can enter your recovery manually by powering down your device, then holding down the Volume down and Power keys at the same time.

Step 7: Flash Those Zips in Recovery

You're now in the bootloader, so navigate to Recovery using the Volume rockers and select using the Power button.

I have CWM recovery, so my path was install zip -> choose zip from SD card -> 0/ -> DarthVader-update.zip. Obviously, yours may not be called Darth Vader, but you get the point. Flash the .zip, then reboot.

If you're using TWRP, the process is essentially the same, only instead of using the Power and Volume keys, you've got a handy touch interface.

Enjoy Your New Custom Lockring

When your device reboots, you'll see your new unique lock ring rubble that you can swipe to unlock. The extra benefit of this new custom lockring is that it'll even work if you have multiple user accounts.